Epson Disc producer PP-100III - Page 69

Publishing Discs 69
3. Set Stacker Settings.
n For the PP-100III
Publish Mode: Select External Output mode.
Stacker 1: Select the type of discs that you loaded into stacker 1.
Stacker 2: Select the type of discs that you loaded into stacker 2.
Stacker 3: If you want to eject published discs to stacker 3, select Output
Stacker.
If you want to eject published discs to stacker 4, select Do not
use.
n For the PP-100AP
Publish Mode: Select External Output mode.
4. Click OK.