-13
R4C4600
html.bk Rev.C
APSPE.FM A5 size
7/24/01
R
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
Continuous paper
See also “Multipart forms” for detailed information on the
specifications for continuous multipart forms.
❏ The sprocket hole must be a circle or notched circle.
❏ The holes must be cleanly cut.
❏ If the horizontal and vertical perforations are crossed, the
shaded area below should not be printed on. Uncrossed
perforations do not have this restricted area.
1. vertical perforation
2. horizontal perforation
1. crossed perforation
2. uncrossed perforation
A
B
28 mm (1.1 inches)
3 mm (0.12 inch)
To Next Page
Loading...
