-14
R4C4600
html.bk Rev.C
APSPE.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
❏ The ratio of the cut/uncut length at the perforation should be
between 3:1 and 5:1. And expansion at the perforation (when
the paper is kept flat) should be less than 1 mm (0.04 inch) as
follows.
1. 3 mm cut
2. 1 mm uncut
3. 1 mm or more
❏ If you use continuous paper whose page length (A in the next
illustration) is under 101.6 mm (4.0 inches), make sure that the
length between folds (B) is over 101.6 mm (4.0 inches.)
To Next Page
Loading...
