Note:
See the documentation provided with the access point for details on entering a PIN code.
4. Turn
o
the scanner.
5. Set the connection mode switch on the scanner to , and then turn on the scanner.
When the Ready and lights on the scanner stay on, the connection has been established.
Note:
Connection fails when the
light turns on. Restart the scanner and access point, move them closer together, and then try
the network settings again.
Related Information
& “Basic Scanning” on page 52
& “Advanced Scanning” on page 63
& “Network Problems” on page 124
User's Guide
Network Settings
88
To Next Page
Loading...
