Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using the remote control Using the control panel
HDMI
USB
USB Display
*Computer2 is only available when Monitor Out Port is set to Computer2
from the Configuration menu. (EB-W16 only)
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
The following screen is displayed while no image signals are input.
Projecting Images
29
To Next Page
Loading...
Need help?
General
