Submenu Function
Color Temp.
(This item cannot be selected if Color Mode is set to sRGB
g
.)
Adjusts the tint for the images. You can adjust tints in three stages
from High, Medium, and Low. The image is tinted blue when
High is selected, and tinted red when Low is selected.
Color Adjust
ment
(This item cannot be selected if Color Mode is set to sRGB
g
.)
You can adjust the color strength for Red, Green, and Blue
individually.
Auto Iris
(This item can be set only if Color Mode is set to the following.)
• EB-W16: Dynamic, Theatre, 3D Dynamic, 3D Theatre
• EH-TW550/EH-TW510: Dynamic, Cinema, Game, 3D
Dynamic, 3D Cinema
Set to On to adjust the iris to obtain the optimum light for images
being projected.
The setting is stored for each Color Mode.
s "Setting Auto Iris" p.43
Reset
You can reset all adjustment values for the Image menu to their
default settings. See the following to return all menu items to
their default settings.
s "Reset Menu" p.80
Signal Menu
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
You cannot make settings on the Signal menu when the source is USB
Display or USB.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.29
Submenu Function
Auto Setup
(Only available when an analog RGB computer signal is being
input.)
Set to On to automatically adjust Tracking, Sync., and Position to
the optimum state when the input signal changes.
Resolution
(Only available when an analog RGB computer signal is being
input.)
Set to Auto to automatically identify the resolution of the input
signal. If images are not projected correctly when set to Auto, for
example if some of the image is missing, adjust to Wide for wide
screens, or set to Normal for 4:3 or 5:4 screens depending on the
connected computer.
Tracking
(Only available when an analog RGB computer signal is being
input.)
You can adjust computer images when vertical stripes appear in
the images.
Sync.
(Only available when an analog RGB computer signal is being
input.)
You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
List of Functions
75
To Next Page
Loading...
Need help?
General
