Correcting Keystone Distortion
You can correct keystone distortion using one of the following methods.
• Correcting automatically
-Auto H/V-Keystone (EB-W16 only)
-Auto V-Keystone (EH-TW550/EH-TW510 only)
• Correcting manually (H-Keystone Adjuster) (EH-TW550/EH-TW510
only)
Manually corrects horizontal keystone distortion using the horizontal
keystone adjuster.
• Correcting manually (H/V-Keystone)
Manually correct distortion in the horizontal and vertical directions
independently.
• Correcting manually (Quick Corner)
Manually correct the four corners independently.
a
When you correct keystone distortion, the projected image may be
reduced.
Correcting automatically
Auto H/V-Keystone (EB-W16 only)
When the projector detects any movement, for example when it is moved
or tilted, it automatically corrects vertical and horizontal keystone
distortion. This function is called Auto H/V-Keystone.
When the projector is moved, it displays a screen for adjustment and then
automatically corrects the projected image.
You can use Auto H/V-Keystone to correct the projected image under the
following conditions.
Correction angle: approx. 20˚ right and left/approx. 30˚ up and down
Adjusting Projected Images
34
To Next Page
Loading...
Need help?
General
