Top Menu Name Submenu Name Items or Setting Values
Operation Direct Power On, Sleep Mode,
Sleep Mode Timer, Lens Cover
Timer, High Altitude Mode, and
Monitor Out Port
Standby Setup (EB-
W16 only)
Standby Mode and Standby
Audio
Language 15 or 35 languages
*1
Info menu
s p.79
Lamp Hours -
Source -
Input Signal -
Resolution -
Video Signal -
Refresh Rate -
3D Format -
Sync Info -
Status -
Serial Number -
Reset menu
s p.80
Reset All -
Reset Lamp Hours -
*1 The number of supported languages differs depending on the region where the
projector is used.
Image Menu
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.29
Submenu Function
Color Mode
You can select the quality of the image to suit your surroundings.
s "Selecting the Projection Quality (Selecting Color Mode)"
p.42
Brightness
You can adjust the image brightness.
Contrast
You can adjust the difference between light and dark in the
images.
Color Saturation
(Adjustment is only possible when component video or
composite video images are being input.)
You can adjust the color saturation for the images.
Tint
(Adjustment is possible when a component video signal is being
input. If a composite video signal is input, adjustment is only
possible when NTSC signals are being input.)
You can adjust the image tint.
Sharpness
You can adjust the image sharpness.
List of Functions
74
To Next Page
Loading...
Need help?
General
