a
Press the [Menu] button.
s "Using the Configuration Menu" p.72
Using the remote control Using the control panel
b
Select Auto Iris from Image.
c
Select On.
The setting is stored for each Color Mode.
d
Press the [Menu] button to finish making settings.
a
Auto Iris can only be set when the Color Mode is set as shown
below.
• EB-W16
Dynamic, Theatre, 3D Dynamic, 3D Theatre
• EH-TW550/EH-TW510
Dynamic, Cinema, Game, 3D Dynamic, 3D Cinema
Changing the Aspect Ratio of the Projected Image
You can change the Aspect Ratio
g
of the projected image to suit the type,
the ratio of height and width, and the resolution of the input signals.
Available aspect modes vary depending on the image signal currently being
projected.
Changing methods
Each time you press the [Aspect] button on the remote control, the aspect
mode name is displayed on the screen and the aspect ratio changes.
Remote control
a
• You can set the aspect ratio from the Configuration menu.
s Signal - Aspect p.75
• In 3D mode, the aspect mode is set to Normal.
Adjusting Projected Images
44
To Next Page
Loading...
Need help?
General
