Distance between projector and screen: approx. 1.2 to 3.0 m
Correction angle: approx. 20˚ right and left/approx. 30˚ up and down
a
Focus help may not function correctly if the projection environment is
too bright.
Adjusting the Volume
You can adjust the volume using one of the following methods.
• Press the [Volume] button on the control panel or the remote control
to adjust the volume.
[
a] Decreases the volume.
[
b
] Increases the volume.
Using the remote control Using the control panel
• Adjust the volume from the Configuration menu.
s Settings - Volume p.77
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
Selecting the Projection Quality (Selecting Color
Mode)
Sets the color mode according to the surroundings. The brightness of the
image varies depending on the color mode selected.
For EB-W16
When a 2D signal is being input
Mode Application
Dynamic
Ideal for use in a bright room. This is the brightest
mode, and reproduces shadow tones well.
Presentation
Ideal for making presentations using color materials
in a bright room.
Theatre
Ideal for watching films in a dark room. Gives
images a natural tone.
Photo
*1
Ideal for projecting still pictures, such as photos, in
a bright room. The images are vivid and brought
into contrast.
Sports
*2
Ideal for watching TV programs in a bright room.
The images are vivid and brought to life.
Adjusting Projected Images
42
To Next Page
Loading...
Need help?
General
