s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.29
Submenu Function
Lamp Hours
You can display the cumulative lamp operating time
*
.
When the lamp replacement time is reached, the characters
are displayed in yellow.
Source
You can display the source name for the connected
equipment currently being projected.
Input Signal
You can display the content of Input Signal set in the
Signal menu according to the source.
Resolution
You can display the resolution.
Video Signal
You can display the settings for Video Signal in the Signal
menu.
Refresh Rate
You can display the
refresh rate
g
.
3D Format
Displays the 3D format of the signal input during 3D
projection (Frame Packing, Side by Side, or Top and
Bottom).
Sync Info
You can display the image signal information.
This information may be needed if service is required.
Submenu Function
Status
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Serial Number
Displays the projector's serial number.
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
Submenu Function
Reset All
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
User's Logo, Lamp Hours, Language, Password, User Button.
Reset Lamp
Hours
Clears the cumulative lamp hours use time. Reset when you
replace the lamp.
List of Functions
80
To Next Page
Loading...
Need help?
General
