120
MaintenanceMaintenance
User’s Guide
Replacing Consumables
This section describes how to replace the lamp and the air filters.
It is time to replace the lamp when:
• The message "Replace the lamp." appears on the screen when
projection starts
.
• When the Lamp indicator is flashing orange
• The projected images get darker or start to deteriorate in quality
Lamp Replacement Period
A message will be displayed.
Flashes orange
TIP
• The replacement warning message is set to appear after the
following periods of lamp use, in order to maintain the initial
brightness and quality of the projected images.
s"Brightness Control" p.83
· When used continuously at high brightness: about 1900 hours.
· When used continuously at low brightness: about 2900 hours.
If you continue to use the lamp after this period, the possibility of
the lamp breaking becomes greater. When the lamp replacement
message appears, replace the lamp with a new one as soon as
possible, even if it is still working.
• Depending on the characteristics and usage conditions of individual
lamps, some lamps may darken or stop operating before the message
is displayed. You should always have a spare lamp ready in case it is
needed.
• Contact your dealer for a spare lamp.
To Next Page
Loading...
