58
Functions for Enhancing Projection
User’s Guide
Tilt the [ ] button on the remote control to change
the position of the sub-screen.
When you press the [Enter] button, the operation
guide screen will disappear and the sub-screen
display position will be set.
To cancel the PinP function, press the [PinP] button once more.
Pointer Function
You can use this function to display a pointer icon on the images that are
being projected, and use the remote control to control it.
The pointer icon can be used to indicate parts of an image that is being
projected to clarify which part is being described or to draw attention to it.
PROCEDURE
Press the [Pointer] button.
The pointer will be displayed in the centre of the screen.
2
3
TIP
• The position of the sub-screen is memorised, so that the sub-screen
will appear in the last position which was set next time the PinP
function is used.
• To switch between sound for the main screen and the sub-screen, use
"Setting" - "PinP Options" - "Audio Output" in the configuration
menu.
TIP
You can use the "Setting" - "Pointer" configuration menu to set the
type, size and movement speed for the pointer. sp.83
1
Remote control
To Next Page
Loading...
