29
User’s Guide
Playing Sound from External Speakers
The audio signals from the input source that is currently being projected can
be output to external speakers. When the input source is changed, the audio
signals change automatically too.
You can connect speakers with built-in amplifiers to the projector's [Audio
Out] port in order to enjoy a fuller quality of sound.
Use a commercially-available audio cable with pin jack ⇔ stereo mini jack
(3.5 mm) plugs or similar.
Use an audio cable with a plugs that match the ports for the external audio
equipment.
To external audio equipment
To [Audio Out] port
Audio cable
(commercially available)
TIP
When a stereo mini-jack audio cable is inserted into the [Audio Out]
port, the sound will be output to external speakers. No sound will be
output from the projector's built-in speaker at this time.
To Next Page
Loading...
