67
Functions for Enhancing Projection
User’s Guide
You can lock some of the remote control buttons to prevent mis-operations
during presentations.
PROCEDURE
Press the [Menu] button on either the remote control
or the projector's control panel, and then select
"Setting" - "Operation Lock" - "Remote Control" from
the configuration menu.
Set to "Partial Lock".
When the confirmation message is displayed, select
"Yes".
The buttons shown in the box in the illustration below will be
disabled.
Locking the Remote Control Buttons
1
2
3
Remote control
TIP
To cancel the remote control button lock function, change the
"Setting" - "Operation Lock" - "Remote Control" setting in the
configuration menu to "OFF".
sp.82
To Next Page
Loading...
