Epson EMP-835 - Changing the Resize;Aspect Ratio; Selecting the Computer Display Method

62
Functions for Enhancing Projection
User’s Guide
Changing the Resize/Aspect Ratio
You cannot switch to real display or change the aspect ratio while EasyMP
is running (EMP-835 only).
When projecting computer images, the display method can be changed
between resized display (in which the images are projected so that they fill
the available projection area) and real display (in which the images are
projected at the resolution of the original input signal).
The default setting is the resized display.
PROCEDURE
The display switches between real display and resized
display each time you press the [Resize] button.
If the input resolution is lower than the panel resolution (1024 ×
768)
If the input resolution is higher than the panel resolution (1024 ×
768)
Selecting the Computer Display Method
Remote control
Projector
Resized display Real display
The image is projected in the
middle of the screen at the original
input signal resolution.
Resized display Real display
The middle section of the image is
projected. You can tilt the [ ]
button on the remote control to
scroll around the image.