Epson EMP-835 - Using the Configuration Menus

87
List of Configuration Menu Commands
User’s Guide
Using the Configuration Menus
The configuration menus can be operated using either the remote control or
the projector's control panel.
PROCEDURE
Press the [Menu] button.
The main configuration menu appears.
Select an item in the main menu.
If using the remote control, tilt the [ ] button up or down to
select a menu item.
If using the projector's control panel, press the [ ] or [ ]
button to select a menu item.
The sub-menu will change depending on the command selected
in the main menu.
Confirm the selection.
Press the [Enter] button on either the remote control or the
projector's control panel to confirm the item selection.
The cursor will be displayed in the sub-menu and settings can
then be made.
Select a sub-menu item.
If using the remote control, tilt the [ ] button up or down to
select a sub-menu item, and then press the [Enter] button to
accept the selection.
If using the projector's control panel, press the [ ] or [ ]
button to select a sub-menu item and then press the [Enter]
button to accept the selection.
1
Remote control
Projector
2
3
4