Epson EPL-6200 - Epsonnet Config with Web Browser; About Epsonnet Config

Network Software 104
Network Guide
EpsonNet Config with Web Browser
About EpsonNet Config
EpsonNet Config with Web Browser is a Web-based utility designed to configure the printer
for use on a network.
By typing the IP address of the network interface for the URL in your browser, you can start
EpsonNet Config to allow you to configure the network interface for TCP/IP, NetWare, MS
Network, AppleTalk, IPP, and SNMP.
Supported Web browser
Windows:
❏ Microsoft Internet Explorer version 4.01 or later
❏ Netscape Navigator version 4.05 or later
Note for Windows XP/Me/98/Server 2003/2000/NT 4.0 users:
To use EpsonNet Config with WebBrowser, Java™ Plug-in must be installed on your computer. To
install Java™ Plug-in, insert the Software CD-ROM in the CD-ROM drive. Double-click the
COMMON folder on the CD-ROM, and then double-click the PLUGIN folder. Finally, double-click
the icon with the exe extension in the folder. Also, you can download Java™ Plug-in from the
following Web site: http://www.java.com
Note for Windows NT 4.0 users:
If you have not yet upgraded to Windows NT Service Pack 3, install the Windows NT Service Pack
before installing Microsoft Internet Explorer.
Mac OS X:
❏ Microsoft Internet Explorer version 4.01 or later
❏ Netscape Navigator version 7.0 or later
❏ Safari
Note:
If you are using Mac OS 9, you cannot configure printer settings. Only network settings are
available.