Network Software 110
Network Guide
* Large format inkjet printers do not support this function.
Information - Printer Screens
This section explains about the Device and Consumable information screens. See
“Configuration - Printer Screens” on page 113 about input, print, emulation, and interface
information.
Note:
The item appears only if your printer supports the function.
Device information
Printing Control Configure the desired settings for Printing Control.
Timeout Configure the desired settings for Timeout.
Time Configure the desired settings for Time.
Configuration - Optional
Administrator Type the name of the administrator and a link to a favorite Web site.
Reset Resets the printer and returns to the default settings.
Password Set the password to protect settings.
Items Explanations
Panel canvas Displays the same information that is displayed on the
printer’s control panel.
Signal A signal shows the status level. The green light is on when the
printer is idle or printing. The yellow light is on when the toner
or oil roll is low. The red light is on when the printer is out of
paper or toner, if paper is jammed, the cover is open, or an
error has occurred.
LEDs The LEDs indicates the current operating printer status when
you first turn on the printer, during normal operation, and
when errors occur.
Remote Control Panel
(Start/Stop, FormFeed,
Continue, Reset, and Warmup
buttons)
You can control the printer with this Remote Control Panel
functions. You can get the same result when you click these
buttons as pressing the buttons on your printer. The warnings
cannot be cleared by the Continue button.
Printer image Displays the printer image.
Error information box Displays error/warning information for the printer.
Printer Model Name The model name of the printer.
IP Host Name The IP host name of the printer.
To Next Page
Loading...
