Troubleshooting 164
Network Guide
Macintosh environment
Printers do not appear in Chooser.
The Bonjour/Rendezvous printer setting is overwritten by the AppleTalk
printer setting.
NetWare environment
For users of printers supporting NetWare queue-based printing
Nothing prints even though clients have sent data to the printer.
EpsonNet Config will not start correctly.
Cause What to do
You may have selected a wrong
one for “Connect via” in the
AppleTalk Control Panel.
Make sure to select Ethernet in AppleTalk Control Panel,
and make sure AppleTalk is active in Chooser. Also,
check the network equipment including the hub cable.
Cause What to do
The same printer is set up with
AppleTalk after the printer is set up
with Bonjour/Rendezvous.
Change the AppleTalk printer name so that it does not
conflict with the Bonjour/Rendezvous printer name.
Cause What to do
Clients may not be registered, or the
network interface may not be
logged in to the NetWare server.
Make sure clients are registered as users of the print
queue and the print server. Also, make sure the network
interface is logged in to the NetWare server.
Cause What to do
Microsoft NetWare Directory Service
is installed on your computer.
If you are using the NDS service, install the Novell
NetWare Client service.
To Next Page
Loading...
