How To 30
Network Guide
For printing via NetWare server:
Download the latest Novell Client from the Novell Web site and install it on the
computer. Also, be sure to install either IP or IPX. See the Novell Web site for detailed
information.
5. Restart the computer.
The necessary components are now installed. Go to the section “Connecting the Network
Interface to the Network” on page 31.
Macintosh
To assign an IP address, subnet mask, etc. to your Macintosh, follow the steps below.
Note:
To print using the AppleTalk protocol and configure the network interface with EpsonNet Config for
Macintosh, select Ethernet or Built-in Ethernet on the AppleTalk Control Panel or the AppleTalk
tab. Then configure the network interface with EpsonNet Config for Macintosh.
Mac OS X
1. From the Apple menu, select System Preferences.
2. Open the Network control panel. Click the TCP/IP tab.
3. Select Built-in Ethernet from the Show pull down menu.
4. Assign an IP address and other settings if necessary.
To Next Page
Loading...
