Network Software 113
Network Guide
Configuration - Printer Screens
This section gives the printer information. Using EpsonNet Config, you can make some of
the same printer settings that you can set using the printer’s control panel. See the User’s
Guide for more information on each item.
Note:
❏ The item appears only if your printer supports the function.
❏ A password is required when you click items under Printer on the Configuration menu.
Input
Print
Setup Menu
Print button Print the selected form overlay.
Refresh button Refresh the status.
Items Explanations
MP Mode Select the priority order of paper feeding from MP Tray.
MP Tray Paper Size Select the paper size for MP Tray.
LC Paper Size Displays the currently loaded paper size in the lower paper
cassette.
MP Tray Paper Type Select the paper type for MP Tray.
LC Paper Type Select the paper type for the lower paper cassette.
Set button Saves any changes.
Refresh button Clears any changes and reloads the previous settings.
Items Explanations
Menu Selection Select Setup.
Interface Time Out Enter the length of the printer waits when it is on line and no
new data is received. When this time is up, the printer
searches for new print data on other channels.
Language Select the displayed language.
Panel Lock Select locking of the printer’s control panel. If you select on,
the printer’s control panel is locked.
Toner Out Select whether to continue printing when the toner is out.
To Next Page
Loading...
