Epson EPL-6200 - Configuring the Printer Port

Network Software 142
Network Guide
6. Confirm the information about the printer’s port you want to configure, and then click
Finish.
Configuring the Printer Port
Follow the steps below to configure the printer port. The printing speed differs depending
on your selection.
1. For Windows Me/98/95/2000/NT 4.0:
Click Start, point to Settings, and then select Printers.
For Windows XP/Server 2003:
Click Start and then Printers and Faxes.
2. Right-click the target printer, and then click Properties.
Items Explanations
The port Information The following items are displayed:
- Port Name
- Host Name or IP Address
- Protocol
Finish button Register the port information to the system and close the Add
EpsonNet Print Port Wizard.
Back button Go back to the printer list window.
Cancel button Close the Add EpsonNet Print Port Wizard.