How To 62
Network Guide
OS/2
This section explains how to configure and use the network interface with an IBM OS/2
System, which includes OS/2 Warp 3 and 4 (OS/2 Warp Connect and OS/2 Warp Server).
LPR printing
1. Double-click the OS/2 system folder, then the System Setup folder, and then
double-click the TCP/IP Configuration icon.
2. Click the Printing tab.
3. Enter the IP address of the network interface in the Remote print server box and the
name of the remote print server’s printer in the second text box. Enter a value of 1 or
greater in the Maximum number of LPD ports box.
4. Click the Autostart tab.
To Next Page
Loading...
