Epson EPL-6200 - Windows 2000;NT Environment

Troubleshooting 163
Network Guide
A communication error message appears when you start printing or when
you open the printer’s properties.
Windows 2000/NT environment
A dial-up connection dialog box appears when printing with TCP/IP via
EpsonNet Print.
A communication error message appears when you start printing or when
you open the printer’s properties.
No clients except an administrator can print via Windows NT Server 4.0.
Cause What to do
When you print with NetBEUI or IPP,
EPSON Status Monitor cannot be
used.
Open the printer’s properties and then click the Optional
Settings tab. Select the Update the Printer Option
Information manually radio button. Open the printer’s
properties, click the Optional Settings tab, and then click
the Notice Settings button. Clear the Monitor the Printing
Status check box.
Cause What to do
You have selected a phone line or
modem (for Internet Explorer 4.0x)
for the Internet connection.
Printing ends normally after you cancel this dialog box,
but the message appears every time you print. Connect
to the Internet using a local area network or start a
dial-up network manually.
Cause What to do
When you print with NetBEUI or IPP,
EPSON Status Monitor cannot be
used.
Open the printer’s properties and then click the Optional
Settings tab. Select the Update the Printer Option
Information manually radio button. Open the printer’s
properties, click the Optional Settings tab, and then click
the Notice Settings button. Clear the Monitor the Printing
Status check box.
Cause What to do
CREATOR OWNER has been deleted
from the Printer Permissions list, or
CREATOR OWNER is set to Print or No
Access.
Add CREATOR OWNER by clicking the Add button in the
Printer Permissions dialog box, or set CREATOR OWNER to
Manage Documents (default setting).