How To 22
Network Guide
2. Double-click the Network icon. Check if the following necessary components are in the
list of installed network components on the Configuration menu. If they are already
installed, go to the next chapter.
The following table lists the components required for configuring the network interface
with EpsonNet Config.
* Only for printers supporting NetWare queue-based printing
Note for users of printers supporting NetWare queue-based printing:
Do not run Novell Client for Windows 95/98 version 3.00 and Novell Client for Windows NT
version 4.50 when using the following modes: NetWare 3.x/4.x Bindery Print Server mode,
NetWare 3.x Remote Printer mode, NetWare 4.x Bindery Remote Printer mode, and NetWare
4.x/5.x NDS Remote Printer mode.
The following table lists the components required for network printing.
EpsonNet Config’s setting screens Necessary components
TCP/IP, AppleTalk, IPP, SNMP (IP trap) TCP/IP
MS Network NetBEUI or TCP/IP
NetWare, SNMP (IPX trap)* Latest Novell Client downloaded from the Novell
Web site
To Next Page
Loading...
