How To 71
Network Guide
6. From the Printer configuration screen, type the printer name. Highlight Type and press
Enter. Select Remote Parallel, LPT1 for Remote Printer mode.
Note:
Be sure to select Remote Parallel, LPT1 for Remote Printer mode.
7. Press Esc; then press Enter to save your changes.
8. Press Esc.
9. Select Queues Serviced by Printer from the Print Server Configuration menu and
press Enter.
10.Select the printer that you want to use from the Defined Printers list and press Enter.
11.Press the Insert key and assign a queue to the print server port from the Available
Queues list.
12.Specify a priority level between 1 to 10. One is top priority.
13.Press Esc to exit PCONSOLE.
Configuring for NetWare using EpsonNet Config
1. Turn on your printer.
2. Load the print server from the file server’s system console which the print queue
volume is set.
>LOAD PSERVER print server name you set using PCONSOLE
To Next Page
Loading...
