92
Setting Options Description
Tint Varying levels available Adjusts the balance of green to
magenta tones in the image
Sharpness Varying levels available Adjusts the sharpness or softness of
image details
White Balance Color Temp.
G-M Correction
Custom
Grayscale
Sets the overall color tone of the
image
Color Temp.: sets the color
temperature according to the
selected color mode; lower values
tint the image red, and higher values
tint the image blue
G-M Correction: makes fine
adjustments to the color tone; higher
values tint the image green and
lower values tint the image red
Custom: adjusts the individual RGB
components of the offset and gain
Grayscale: adjusts the red, green,
blue, and brightness for the selected
adjustment level
Frame Interpolation Off
Low
Normal
High
Adjusts the smoothness of image
movement (only available when
Image Processing is set to Fine in
the Signal I/O menu and 4K
100/120Hz signals are not being
projected)
Light Output 50% (ECO) to 100% (Normal) Sets the brightness for the light
source
Dynamic Contrast Off
Normal
High Speed
Adjusts the projected luminance
based on the image brightness
To Next Page
Loading...
Need help?
General
