Epson PERFECTION V700 PHOTO - Connectors; Connector Configuration; Connector Reference Table

EPSON Perfection V700 Photo Revision A
Appendix Connectors 73
7.1 Connectors
The following table indicates the connector signal wiring on the
electrical circuit boards of this product.
7.1.1 Connector Configuration
Figure 7-1. Diagram of Wiring Connectors
7.1.2 Connector Reference Table
Note *1: Using two of the four pins.
*2: Using two of the three pins.
Table 7-1. Connector Reference Table
Board Connector Description Number of Pins
Main Board
CN1 USB 2.0 4
CN2 IEEE-1394 8
CN4 SUB Board 6
CN5 ISN Board 34
CN7 DRV Board 8
CN9 CR Motor 4
CN10 DC Input 2
SUB Board
CN1 Panel Board 4
CN2 Main Board 6
Panel Board CN2 SUB Board 4
ISN Board
CN1 Lens Motor 4
CN2 Inverter Board 4
CN3 Sensor 2
CN4 SUB_E Board 3
CN6 Main Board 34
Inverter Board
CN1 ISN Board 4
CN2
Lamp x 2 2 (4)
∗
1
CN3
DRV Board
CN2 Main Board 8
CN3 TPU CR Motor 4
CN4 SUB_B Board 5
SUB_B Board
CN1 DRV Board 5
CN2 SUB_C Board 3
CN3 TPU Inverter Board 2
CN4 SUB_D Board 3
TPU Inverter Board
CN1 SUB_B Board 2
CN2
Lamp x 2
2
CN3 2 (3)
*2
SUB_C Board - SUB_B Board 3
SUB_D Board - SUB_B Board 3
SUB_E Board CN1 ISN Board 3