Epson PERFECTION V700 PHOTO - Changing the Scan Mode

EPSON Perfection V700 Photo Revision A
Disassembly / Assembly Disassembly Procedure 45
4.2.5 Removing the Main Board
1. Remove the Upper Housing. See Section 4.2.2 on page 40.
2. Move the Carriage Unit to the centre.
Figure 4-18. Centering the Carriage Unit
3. Remove the Main Board Cover Sheet from the Upper Main Board
Cover.
4. Remove the four C.B.P. M3 x 8 screws and C.B.P. M3 x 10 screw
that secure the Upper Main Board Cover.
5. With the rear of the Upper Main Board Cover lifted, slide the cover
toward the rear to release tab A, and remove the Upper Main Board
Cover.
Figure 4-19. Removing the Main Board Cover
Carriage Unit
C.B.P. M3x8 (7±1 kgf.cm)
Tab A
2
3
4
5
1
Beneath the Main Board Cover Sheet
Positioning Hole and Guide Pin
Upper Main Board
Cover
Main Board
Cover Sheet
C.B.P. M3x10 (7±1 kgf.cm)