125
Note: The test pattern's shape is determined by the Screen Type setting. Be sure to set the correct
screen type before adjusting with the test pattern.
Note: Some menu options may be unavailable when displaying a test pattern and you may need to
project from a connected device to change these settings.
1. Turn on the projector.
2. Press the Menu button on the remote control.
3. Select the Installation menu and press Enter.
4. Select the Test Pattern setting and press Enter.
5. Select the pattern you want to display and press Enter.
A test pattern is displayed.
6. Adjust the image as necessary.
7. Press Esc to clear the test pattern.
Parent topic: Using Basic Projector Features
To Next Page
Loading...
