116
7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the
area selection screen.
Note: You can also use the numeric buttons on the remote control to adjust the image shape. If one
of the directional arrows on the screen turns gray, you cannot adjust the shape any further in that
direction.
8. When you are finished, press Esc.
The Geometry Correction setting is now set to Quick Corner in the projector's Installation menu.
Parent topic: Image Shape
Correcting Image Shape with Arc Correction
You can use the projector's Arc Correction setting to adjust the curve or arc of the sides of your image.
Note: If you change the Screen Type or Screen Position settings, your image adjustments are reset.
To Next Page
Loading...
