98
Parent topic: Registering a Digital Certificate on the Projector
Art-Net Channel Definitions
Art-Net is an Ethernet communication protocol based on the TCP/IP protocol. You can control the
projector by using a DMX controller or an application system.
The following table lists the channel definitions used to control the projector in Art-Net.
Channel/Function Operation Parameters Description
1 Adjusting light
(dimming)
0% to 100% 0 to 255 (default is 0) Adjusts the image
brightness
2 Shutter control Shutter open
Non-operational
Shutter closed
0 to 63 (default is 128)
64 to 191
192 to 255
Enables/disables A/V
Mute
3 Switch source Non-operational
HDMI1
HDMI2
LAN
Screen Mirroring1
Screen Mirroring2
USB Display
USB
0 to 7 (default is 0)
8 to 15
16 to 23
80 to 87
88 to 95
96 to 103
104 to 111
112 to 119
Switches to the
specified source
7 Digital Tele/Wide Digital Tele/Wide 0 to 255 (default is 255) Zooms using the
specified amount of
movement
11 Power control Power off
Non-operational
Power on
0 to 63 (default is 128)
64 to 191
192 to 255
Turns the projector
power on or off
13 Lock Cannot control
Can control
0 to 127 (default is 0)
128 to 255
Enables/disables Art-
Net operations
To Next Page
Loading...
