226
Setting Options Description
HDBaseT Control Communications Enables or disables communication from
the Ethernet and serial ports on the
HDBaseT transmitter or switcher; turning
on this setting disables the projector's LAN
and RS-232C ports. Setting is only
displayed when Extron XTP is set to Off.
Extron XTP Set to On when you connect an Extron XTP
transmitter or switcher to the HDBaseT
ports.
Reset Signal I/O Settings — Resets all settings on the Signal I/O menu
to their default values
Parent topic: Adjusting the Menu Settings
Installation Settings - Installation Menu
Settings on the Installation menu let you set up your projector for your installation environment. The
available settings depend on the currently selected input source and other settings.
To Next Page
Loading...
