41
Multiple Projector Connection Menu Settings
After connecting multiple projectors to project a unified image, see the tables below to select the correct
projector menu settings. Make sure your computer is connected to Projector 1 (the left-most projector in
your setup).
Note: You may need to restart the projector during the process. Follow any on-screen instructions.
Setup (2-4 Projectors)
1. Connect the computer and the projectors using HDMI cables.
2. Press the Menu button on the control panel or remote control.
3. Select the necessary HDMI Link setting in the projector's Signal I/O menu. See the list of settings for
more details.
Setting Projector 1 Projector 2 Projectors 3-4
HDMI Out Power
Link
On On On
HDMI Out Terminal
End
Off Off On
Note: This may not work if five or more projectors are connected in a series or if the settings are not
correct.
Parent topic: Connecting Multiple Projectors of the Same Model
To Next Page
Loading...
