160
3. Select the Operation menu and press Enter.
4. Select the Content Playback setting and press Enter.
5. Select the On setting and press Enter.
You see a confirmation prompt.
6. Turn off the projector.
7. Turn on the projector again to enable Content Playback mode.
8. Press the Home button to make sure Content Playback mode is enabled.
Parent topic: Projecting in Content Playback Mode
Related references
Feature Settings - Operation Menu
Projecting a Playlist in Content Playback Mode
You can project playlists that contain images and movies in Content Playback mode.
To Next Page
Loading...
