82
8 Searches for connected sources
5. Select the icon corresponding to the projector function you want to control.
6. To select projector menu settings, select Advanced on the Web Control screen.
Note: If you see a log in window, enter your user name and Web Control Password. (The default
user name is EPSONWEB. You can change the Web Control Password using the projector's
Network Settings menu. If you are prompted to set a Monitor Password, enter a password up to 16
characters long and then select Apply.)
7. Select the name of the menu and follow the on-screen instructions.
Parent topic: Using the Projector on a Network
Web Control Options
Basic Control
Note: If the Remote Password is set to On, you need to enter your user name and password. (The
default username is EPSONREMOTE. No password is set by default.)
To Next Page
Loading...
