135
Note: When projecting images from an Epson document camera connected by USB, you can select only
Auto, H-Zoom, and V-Zoom.
Aspect ratio setting Description
Auto Automatically sets the aspect ratio according to the input signal and
the Resolution setting.
Full Displays images using the full width of the projection area, but does
not maintain the aspect ratio.
H-Zoom
V-Zoom
(Not available when Screen Type
is set to 16:6)
Displays images using the full width of the projection area and
maintains the aspect ratio of the image.
Native
(Not available when Screen Type
is set to 16:6)
Displays images as is (aspect ratio and resolution are maintained).
Note: The appearance of the Native image aspect ratio setting varies depending on the input signal.
Note: Using the aspect ratio function of the projector to reduce, enlarge, or split the projected image for
commercial purposes or for public viewing may infringe upon the rights of the copyright holder of that
image based on copyright law.
If there are margins between the image edges and the screen, you can adjust the position of the
projected image using the Screen Position setting in the Installation menu.
Parent topic: Image Aspect Ratio
Color Mode
The projector offers different Color Modes to provide optimum brightness, contrast, and color for a
variety of viewing environments and image types. You can select a mode designed to match your image
and environment, or experiment with the available modes.
Changing the Color Mode
Available Color Modes
Parent topic: Using Basic Projector Features
To Next Page
Loading...
