147
6. Select the Dynamic Contrast setting, choose one of the following options, and press Enter:
• Normal to adjust brightness at the standard speed.
• High Speed to adjust brightness as soon as the scene changes.
7. Press Menu or Esc to exit the menus.
Parent topic: Using Basic Projector Features
Using Frame Interpolation
You can use the projector's Frame Interpolation feature to smooth fast-moving video by comparing
consecutive image frames and inserting an intermediate image frame between them.
You can use this feature in any of the following conditions:
• Edge Blending is set to Off in the projector's Multi-Projection menu.
This setting is available when using one of the following input sources:
• HDMI1
• HDMI2
• HDBaseT
1. Press the Menu button.
To Next Page
Loading...
