218
Setting Options Description
Tint Varying levels available Adjusts the balance of green to
magenta tones in the image
Sharpness Varying levels available Adjusts the sharpness or softness of
image details
White Balance Color Temp.
G-M Correction
Custom
Sets the overall color tone of the
image
Color Temp.: sets the color
temperature according to the
selected color mode; lower values
tint the image red, and higher values
tint the image blue. This setting is
not displayed when Color Filter is
set to Warm White or Cool White
G-M Correction: makes fine
adjustments to the color tone; higher
values tint the image green and
lower values tint the image red
Custom: adjusts the individual RGB
components of the offset and gain
Frame Interpolation Off
Low
Normal
High
Adjusts the smoothness of image
movement. Setting is only displayed
in the following cases:
• Edge Bending is set to Off
• The current source is HDMI or
HDBaseT
Dynamic Contrast Off
Normal
High Speed
Adjusts the projected luminance
based on the image brightness
To Next Page
Loading...
