229
Setting Options Description
Geometry Correction Wizard — Guides you step-by-step through
correcting the image shape
Connect to Setting Assistant — Displays the QR code to connect to
the Epson Setting Assistant app
Digital Zoom Varying levels available Adjusts the size of the projected
image
Image Shift Varying positions available Adjusts the position of the projected
image (setting does not appear if
Digital Zoom is at its widest setting)
Remote Receiver Front/Rear
Front
Rear
Off
Limits reception of remote control
signals by the selected receiver; Off
turns off all receivers
Screen Type 4:3
16:6
16:9
16:10
21:9
Sets the aspect ratio to fit the image
on the projection surface. Setting is
only displayed when Content
Playback is set to Off in the
projector's Operation menu.
Screen Position Varying positions available Shifts the image position on the
screen (only available if the Screen
Type setting is not set to the same
aspect ratio as the projector's native
resolution)
High Altitude Mode On
Off
Regulates the projector's operating
temperature at altitudes above 4921
feet (1500 m)
Source — Displays settings saved for each
input source. To change settings for
an input source, make sure the
source is connected and select that
source.
To Next Page
Loading...
