29
Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an
angle, if possible. If the projector is installed at an angle, it should be installed by qualified technicians
using mounting hardware designed for use with this projector.
If you project from the ceiling or wall, or from the rear, be sure to select the correct Projection option in
the projector's menu system.
Note: If the projector is installed at an angle, it should be installed by qualified technicians using
mounting hardware designed for use with this projector. Install the projector appropriately to prevent it
from falling down.
Note: Install the projector appropriately to prevent it from falling down. Use M4 screws (up to a depth of
0.35 inches [9 mm]) to fix the projector's ceiling mount fixing points and the mounting hardware at the
four points.
Installation space
Be sure to leave the following amount of space around the projector so as to not block the air exhaust or
intake vents.
To Next Page
Loading...
