Epson PP 803 - Paper Cutter (Only Printer PP 803 )

Technical Data
PP 803
8-6
8.1.4.5
Paper Cutter
The optional paper Cutter is a tool to the fanfold paper into single sheets or to
separate a print job.
minimum
maximum
$
Paper length:
3 inch
14 inch
$
Paper weight:
$
Cut sheets
60 g/m² (16 lb/ream)
150 g/m² (40 lb/ream)
$
Form Set
(1 + 5 copies)
350 g/m² (95 lb/ream)
Total paper-/form set thickness = 1.1 mm
Life time: 1 milion cuts
Processing Lables
If, for some reason, it is not desired to cut exactly on the perforation it is very
important to
cut below the perforatio
n.
If the paper is cut above the perforation the remaining paper can easily bend
and cause a paper jam.
Cutting through a sticky label leaves glue on the blade, leading to problems with
the cutting device.
8.1.4.6
Cut Sheet Tray
Optional to collect single sheets for output at the front (
MANUAL
)
depth
=
210 mm / 8.3" for short formats (shortest position)
390 mm / 15.4" for long formats
capacity
=
up to 50 single sheets (80g/m² )