Epson PP 803 User Manual

Getting Started
1-26
1.12
Emulation Selection
The following emulations are included in the PM Ser/Par:
$
EPSON LQ / ESC/P2
in Macro 1 (Default)
$
IBM ProPrinter XL 24
in Macro 2
$
IBM ProPrinter XL 24 AGM
in Macro 3
$
EPSON LQ / ESC/P2
in Macro 4
To change from one emulation to another, follow the procedure below. The ex-
ample shows the keys to press along with the display information for a change
from
EPSON LQ / ESC/P2
in Macro 1 to
IBM ProPrinter
in Macro 2.
Switch the printer ON. The display shows
READY 1 ELQ
.
KEY
DISPLAY
[OFFLINE]
LOCAL
1 ELQ
[MACRO SELECTION]
MACRO 2
U
(hold the key down and the available marcos are scrolling in the
display and stop pressing with selected Macro 2)
[ONLINE]
READY
2 IPP
The information
READY 2 IPP
indicates the selected macro and the
emulation of this macro, for example:
1 ELQ
Macro 1 with Epson Emulation
2 IPP
Macro 2 with IBM Proprinter Emulation
3 AGM
Macro 3 with IBM Proprinter AGM Emulation
4 ELQ
Macro 4 with Epson Emulation.
Note:
A “Macro“ is a summary of application specific parameter settings. It is
possible to have a total of four macros, each with a different summary of
VALUE settings.
The settings selected and confirmed are only active until the printer is
switched off. In order to prevent losing your new settings you can save
them using the function
SAVE MENU
(see chapter
2.4.3 How to Save
Settings
.

Epson PP 803 Specifications

General

Brand	Epson
Model	PP 803
Category	Printer
Language	English