Table 7 (Cont.): Further Control Sequences, supported by
IBM Emulation Mode
(Native Commands)
Escape Sequence Mnemonic Function
ESC [ P1 m SGR Set Graphic Rendition
P1 = 0: default - no rendition or
rendition reset
P1 = 1: bold
P1 = 3: italics
P1 = 4: underline
P1 = 9: crossed out or strike through
printing
P1 = 20: enlarged double width printing
P1 = 21: double underline
P1 = 22: bold reset
P1 = 23: italics reset
P1 = 24: underline reset
P1 = 29: crossed out reset
P1 = 30 to 36: ignored
P1 = 53: over lined
P1 = 55: over lined reset
To Next Page