Table 4: (Cont.) Vertical Form Handling
Escape Sequence Mnemonic Function
ESC [ ; P2 s AGC/PCC Print Gap Control:
Native Command, P2 = 3/0 : Automatic Gap Control
P2 = 3/1 : Print Gap for 1-ply copy
P2 = 3/2 : Print Gap for 2-ply copies
P2 = 3/3 : Print Gap for 3-ply copies
P2 = 3/4 : Print Gap for 4-ply copies )
2
P2 = 3/5 : Print Gap for 5-ply copies
P2 = 3/6 : Print Gap for 6-ply copies
P2 = 3/7 : Print Gap for 7-ply copies
P2 = 3/8 : Print Gap for 8-ply copies )
1
P2 = 3/9 : Print Gap for 9-ply copies )
1
) only for printer
PP 803
; )
PP 809
max 4 copies
12
ESC [ ; ; P3 s Paper Exit:
Native Command P3 = 0 : reserved
P3 = 1 or 2 : Paper Exit Front (manual)
P3 = 3 : Batch output (rear), default
ESC [ ; ; ; P4 s Cut Mode On/Off: )
3
Native Command P4 = 0 : Cut Mode Off
P4 = 1 : Cut Mode On
P4 = 2 : Cut on actual position
(cutting edge is approximate 4 mm above the base of the actual line)
) only active if
CUT DEVICE = YES
3
To Next Page