Table 10: Further Control Sequences, supported by
EPSON LQ Emulation Mode
(Native Commands)
Escape Sequence Mnemonic Function
$$ $$ Control String Introducer (CSI) for ESC [
$$/ $$/ control String Introducer for ESC
ESC [ < s EJF Eject Form; this command causes a
vertical form feed to the beginning of the
next page.
ESC [ > s IF Insert Form
ESC [ P1 SP X SPQ Select Print Quality
P1 = 0: LQ
P1 = 1: NLQ; this is only valid if the NLQ
type style is selected.
P1 = 2: DRAFT
P1 = 3: HSD (high speed draft)
Note:
The LQ / NLQ selection becomes active if
a LQ-/ NLQ-font is selected.
Draft / HSD becomes active if type style
DATA is selected.
ESC [ P1 ; P2 SP r SM # Select Macro and Change Emulation
P1 = 1: Macro 1
P1 = 2: Macro 2
P1 = 3: Macro 3
P1 = 4: Macro 4
P2 = 0: no change of emulation
P2 = 2: IBM ProPrinter Emulation
P2 = 3: IBM ProPrinter AGM Emulation
P2 = 4: EPSON Emulation
To Next Page