Epson PP 803 - Page 259

Appendix E EPSON LQ 2550, ESC/P2, and Barcodes Quick Reference
E-23
Table 10 (Cont.): Further Control Sequences, supported by
EPSON LQ Emulation Mode
(Native Commands)
Escape Sequence Mnemonic Function
ESC [ ; P2 ; P3 ; P4 ; P5 ; P6 ; P7 SP z
see Appendix F BH Barcode Header
BARCODE Programming P2: Barcode type
P3: Height of barcode
P4: Width of the thin bars
P5: Width of the thin gaps
P6: Ratio width to thin (bars / gaps)
P7: Uni-directional or bi-directional
printing
0 : or not programmed: means no
changes
1 : uni-directional printing in LQ
2 : bi-directional printing in LQ
3 : uni-directional printing in NLQ
4 : bi-directional printing in NLQ
ESC [ ? 0 h SMBC Set Mode Barcode
ESC [ ? 0
l
RSBC Reset Mode Barcode