Electromagnetic Compatibility
We certify that the equipment at issue,
corresponds to the law regulations ruling electromagnetic compatibility of ap-
pliances (89/336/EWG) and, therefore, fulfills the requirements for conformity
marking with the CE-sign.
For standard printer with serial and parallel interface (Ser/Par PM) please note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on. The user is encouraged to try to correct the interference by one or more of
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from the
circuit to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
For printer with all other interface please note:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to
Operation of this equipment in a residential area is likely to cause harmful
inerference in which case the user will be required to correct the interference at
To Next Page
Loading...
Need help?
General