Epson PP 803 - Page 95

Maintenance
5-7
Only for printer with Paper Cutter (3)
$
Pull the flap (2) to the front side.
$
Move the Paper Cutter (3) to the left until the cutter jumps out of its fixiation.
$
Grasp the Paper Cutter (3) at the holder (4) of the flap, move it a little bit to
the front side, and remove it to the right.
Attention:
Danger to injure one´s hand by the blade (5) !
For all printers
$
Slide the print head (1) out of the fixation support.